Jump to content

User talk:MJCdetroit/Archive June 1st, 2007 to August 1st, 2007

Page contents not supported in other languages.
From Wikipedia, the free encyclopedia

WikiProject Berlin

I have created a temporary page for WikiProject Berlin. If you are interested, you can sign up there. Kingjeff 18:01, 5 June 2007 (UTC)

San Jose FAR

San Jose has been nominated for a featured article review. Articles are typically reviewed for two weeks. Please leave your comments and help us to return the article to featured quality. If concerns are not addressed during the review period, articles are moved onto the Featured Article Removal Candidates list for a further period, where editors may declare "Keep" or "Remove" the article from featured status. The instructions for the review process are here. Reviewers' concerns are here.--Loodog 03:30, 6 June 2007 (UTC)

Territorial/Provincial Infoboxes

I saw that you were fixing the infobox like this. Is there any way to fix the template so that the land area shows up in the box. It looks really odd to have the total area and the water area with the land missing. I would have tried but I suspect that I would totally wreck the template. Cheers. CambridgeBayWeather (Talk) 22:56, 7 June 2007 (UTC)

I had seen on the talk page that someone asked that same question and didn't get anywhere with it. I don't think it would be a problem to do. All the infoboxes already had the parameter LandArea_km2 (or something like that) entered in. I update you when done. I hope it has finally warmed up a little up there. :) —MJCdetroit 02:32, 8 June 2007 (UTC)
Done. :). —MJCdetroit 02:45, 8 June 2007 (UTC)
Thanks. CambridgeBayWeather (Talk) 03:28, 8 June 2007 (UTC)

Halifax Regional Municipality

Hi MJC,

Just wanted to thank you for your work on the Halifax Regional Municipality page. From somebody that lives there, it's appreciated. Cheers and thanks again. --RobNS 21:12, 13 June 2007 (UTC)

So I reckon that you liked the collapsible lists edit. I was just testing the idea. I think it cleans up the infobox nicely. —MJCdetroit 01:08, 14 June 2007 (UTC)

Thanks

Hi MJCdetroit,

Thanks for the warm welcome to Wikipedia and for the offer of help should I need it, much appreciated.

Kindest regards --Nordic Crusader 11:04, 16 June 2007 (UTC)

myspace

can I see your profile on myspace? I also live in the milwaukee area —Preceding unsigned comment added by TV2007 (talkcontribs)

Milwaukee?...It's mjcDETROIT and I don't know you (from wiki)— so no. —MJCdetroit 17:50, 17 June 2007 (UTC)

Coordinates in Infobox Settlement

I don't understand what you mean by this edit summary; {{coord}} does support coordinates in degrees only. For example: 34°34′N 45°53′W / 34.56°N 45.89°W / 34.56; -45.89. Can you give an example of values you think it does not support? Andy Mabbett 20:24, 17 June 2007 (UTC)

I'm sorry but it looks like I was mistaken. I've revert it back. :) —MJCdetroit 01:55, 18 June 2007 (UTC)
Thank you.. Andy Mabbett 07:53, 18 June 2007 (UTC)

Location maps

Would you consider dual-licensing your contributions to {{Location map}} and related templates under the cc-by 2.5 license so i could use them on the english wikinews? Happy editing. Bawolff 00:55, 19 June 2007 (UTC)

Sure, tell me which ones because I don't think that I created any of the images. —MJCdetroit 02:45, 19 June 2007 (UTC)
The only one I started was Pennsylvania and that uses a map created by User:Ruhrfisch. Talk to him. &mddash;MJCdetroit 14:08, 19 June 2007 (UTC)

Conversions

Hi there! Have a favor to ask of you. A few days ago, someone asked if the conversion templates could be modified to handle dimensional conversions. That lead to me upgrading one of the templates ({{ft to m}}) to provide that capability (and more). Would you be willing to test-drive the new template, please? I have tested it quite thoroughly, but I know that it only takes five minutes of other person's time to find some serious bug that testers have missed :) If you could also check if the formatting of all types of conversions is MOS-compliant, that'd be great as well.

I am not planning on upgrading any other templates until we are reasonably sure this one is free of defects (it's not exactly a joyful experience to sort out over a thousand instances of curly brackets, so I'd rather limit this experience to one template for now, and then re-use the defect-free code elsewhere). Any help would be much appreciated. Cheers,—Ëzhiki (Igels Hérissonovich Ïzhakoff-Amursky) • (yo?); 15:40, 21 June 2007 (UTC)

I certainly will. I try to test it within 24 hours.
While I am thinking of it, I think that the precision default should be zero on the conversion templates. I find myself putting precision=0 almost all the time. —MJCdetroit 15:53, 21 June 2007 (UTC)
The way I did it is that it defaults to zero in all cases except when a value is less than ten, in which case the default precision is one. It can still be manually overridden (by setting precision=0) for cases when precision of one is undesirable.—Ëzhiki (Igels Hérissonovich Ïzhakoff-Amursky) • (yo?); 17:04, 21 June 2007 (UTC)
Wikipedia:Sandbox/Ft to M <-- my tests and notes so far....—MJCdetroit 16:30, 21 June 2007 (UTC)
It seems ok to me. MJCdetroit 14:31, 22 June 2007 (UTC)

Weather Infobox

Hi, MJC, I see you're already doing the automatic unit conversion thing, good job. Just wanted to tell you though that I'm still making some changes, just so we don't have two conflicting versions. One thing that concerns me a bit is that the way the wiki parser works, apparently, when you have an #if expression, it first expands both the "then" expression and the "else" expression before picking one of them according to the condition and throwing the other one away. Since the template now has lots of nesting #if expressions, parsing the template becomes very slow and could potentially cause some overflow (try, for example, to have a page with several of the new weather infoboxes, see the current User:Doron/test5). For this reason I was thinking about restructuring the code so that it wouldn't lead to such a big expand size (which is currently 730-800K!). So how about we coordinate our plans about the template?--Doron 21:32, 21 June 2007 (UTC)

Not a problem. What did you have in mind? —MJCdetroit 02:10, 22 June 2007 (UTC)
P.S. How do you find the expand size of the template? —MJCdetroit 02:18, 22 June 2007 (UTC)
It's in the HTML code of the page. Do an inline search for "pre-expand include size".—Ëzhiki (Igels Hérissonovich Ïzhakoff-Amursky) • (yo?); 03:18, 22 June 2007 (UTC)
Well, the problem has two sides. One side is the "inner loop", by which I refer to the call to the color scheme (User:Doron/test3). This call happens once for each data cell, so it has the greatest effect on space requirements. Reducing the size of it would be a significant advantage. Just by removing all the whitespace (making it somewhat less readable) reduced the infobox's expand size by a third. The next natural step would be to split the color template into two (temperature and precipitation), which would make each included chunk even smaller. Another thing that can be done is to turn each of them into arithmetical expressions (instead of #switch). The other side of the problem is the number of calls to this "inner loop". Since both sides of the #if are expanded, we need to make sure that the total number of calls to the row template is as close as possible to the maximal number of lines in the output. In other words, something like "if (cond) call A B C, else call D E F" would cause 6 expansions, while outputting only the results of 3. A more efficient solution would be something like "call AD(cond) BE(cond) CF(cond)" (which has only 3 expansions) where the choice between ABC and DEF is deferred to the subroutines, each capable of being one or the other. Am I making any sense?...--Doron 21:20, 23 June 2007 (UTC)
Sorry, I haven't been around lately. It tends to happen in Michigan when the weather is nice. To answer you question: Somewhat, to be honest, I'll probably have to read it again. Hopefully, you've made progress since you posted this. —MJCdetroit 11:59, 25 June 2007 (UTC)
Re: Almost done, there's one more thing I need to do, sorry about the delay...--Doron 06:36, 28 June 2007 (UTC)

Not a problem, take as long as you need. —MJCdetroit 11:49, 28 June 2007 (UTC)

Thanks for the barnstar... :)--Doron 06:58, 24 July 2007 (UTC)

?

Richmond, California id like to make a request for comment in the 80 image section please. Cholga saYS THANKS!Cholga is a SUPERSTAR¡Talk2Cholga!Sexy Contribs 01:11, 24 June 2007 (UTC)

Settlement Infobox

Hi, I really like the new settlement infobox you put in Prince George, British Columbia. Do you suppose it is useful in a very small settlement like Balfour, British Columbia, for instance, (where I already put one to see how it looks). I want to expand some of these small town stubs and I'm wondering whether to use that info box or if there's another one that's more appropriate.CindyBotalk 02:59, 2 July 2007 (UTC)

Nope, {{Infobox Settlement}} is designed to be used by all settlements whether incorporated or not, whether a 1/4 square mile with a population of one or hundreds of square miles with millions of people. All of the parameters except official name are optional; see the table at Infobox Settlement. Since your edits seem to be mostly BC, I will place some empty syntax on your talk page that will help you out. —MJCdetroit 03:13, 2 July 2007 (UTC)

Got it. Thanks, I'll be putting it to some good use, I'm sure.CindyBotalk 03:44, 2 July 2007 (UTC)

Here are some various Canadian examples: counties (e.g., Queens County), cities (e.g., Montreal and Vancouver), towns (e.g., Westville), villages (e.g., Bawlf), Indian reserves (e.g., Tsuu T'ina Nation 145), and hamlets (e.g., Elkwater). —MJCdetroit 03:47, 2 July 2007 (UTC)

I see what you mean, it's pretty flexible. And it seems like quite a few places are using it now, judging by the "what links here" to the template. Looks much tidier than the previous versions too.CindyBotalk 04:07, 2 July 2007 (UTC)

Infobox Armenia

I moved the Infobox material to my sandbox as it looks as though it'll be deleted anyway. I think that it's useful and although it only covers four pages now, it will be expanded. I want to improve and expand this infobox, perhaps making it on par with the Polish City Infobox. Perhaps we can work together on developing and/or expanding it. I just wanted to make something to replace this template that plagues most pages about Armenian cities and towns:

Goris
Գորիս
Location of Goris in Armenia
Province Syunik
Population 20,840 est. (2001)
Established 1885
Time zone GMT +4
39°31′N 46°20′E / 39.517°N 46.333°E / 39.517; 46.333

Send me your thoughts, Aivazovsky 18:28, 9 July 2007 (UTC)

Per your "Send me your thoughts", I replied to your talk page. MJCdetroit 19:46, 9 July 2007 (UTC)

Conversion templates update

Templates {{kg to lb}} and {{lb to kg}} are now available. Would it be safe to deprecate {{weight}} now (after all substitutions being taken care of, of course)?—Ëzhiki (Igels Hérissonovich Ïzhakoff-Amursky) • (yo?); 14:15, 12 July 2007 (UTC)

That's good because {{weight}} is not a very user-friendly template. —MJCdetroit 14:19, 12 July 2007 (UTC)
OK, I'll start replacing it with the new ones. Also, while I'm on the subject of conversions again, are there any other types of weight conversions that might benefit from having a dedicated template?—Ëzhiki (Igels Hérissonovich Ïzhakoff-Amursky) • (yo?); 14:42, 12 July 2007 (UTC)
Two that I can think of would be some type of gram to oz/oz to g template and grain to gram/ g to gr template. The latter would be helpful in firearms/weapons articles as bullets, gunpowder and arrows are measured in grainsMJCdetroit 15:37, 12 July 2007 (UTC)
Alright, {{g to oz}}, {{oz to g}}, {{g to gr}}, and {{gr to g}} are ready. Thanks.—Ëzhiki (Igels Hérissonovich Ïzhakoff-Amursky) • (yo?); 16:26, 12 July 2007 (UTC)
As are {{cm to in}} and {{in to cm}}. Enjoy.—Ëzhiki (Igels Hérissonovich Ïzhakoff-Amursky) • (yo?); 00:06, 13 July 2007 (UTC)

I've again reverted your edits to the above page because the infobox you promoted there has not been discussed or achieved consensus for UK districts. If you wish to comment on this, please do so on the relevant talk page for the guidelines Wikipedia talk:WikiProject UK geography/How to write about settlements. Comments on there and elsewhere make the point that this template is not well-suited for UK districts, and so that is why the wording is as it is on the guidelines at the moment.  DDStretch  (talk) 19:34, 12 July 2007 (UTC)

I didn't realize that it had been reverted twice, sorry. I will reply on the talk page. —MJCdetroit 20:29, 12 July 2007 (UTC)

Infobox cities in Mexico

Hi, I saw that all the towns I had put "Infobox cities in Mexico" you switched them to "Infobox Settlement" should I use that infobox from now on for all cities in Mexico? Also I wanted to ask you if there was an Infobox for Municipalities in Mexico that I could use. Thanks Alixb 23:06, 17 July 2007 (UTC)

Yes, you should. The old infobox will need to be TfD'd in the next few days. Yes you can use infobox settlement for Municipalities too. I was even considering replacing the manually coded infoboxes of the states with Infobox Settlements. I'll do one of each tomorrow to give you some examples.—MJCdetroit 03:12, 18 July 2007 (UTC)
Example #1: Monterrey (municipality)
Thanks, then I'll start using that infobox from now on and I look forward to more examples of municipalities. Alixb 04:17, 18 July 2007 (UTC)
Actually, many cities in Mexico already used Infobox Settlement (aka Infobox City), like Mexicali, Mexico City, and Tijuana, and Guadalajara. —MJCdetroit 12:00, 18 July 2007 (UTC)
Example #2: Jalisco (state)
Well I was kinda looking for examples of how it is applied to municipalities in Mexico. Thanks for your help Alixb 15:47, 18 July 2007 (UTC)
I'll look for some other muicipalities to do. The problem that I found was that there isn't a lot of information available. —MJCdetroit 15:53, 18 July 2007 (UTC)
Yeah, I was planning on doing some municipalities but I couldnt as I didnt know what the appropriate infobox was. But now that you've told me that its the settlement one, I'll start working on that. Alixb 20:35, 18 July 2007 (UTC)
Well it works and as they say if it ain't broke don't fix it...Here's one more that I did: La Paz, México. I looked in the commons and there doesn't seem to be any specific maps for most of the municipalities. That's why I used the state's map. Good luck. —MJCdetroit 20:39, 18 July 2007 (UTC)

I'm working on the infoboxes for the municipalites in Mexico, but I was just wondering if you know the rules on the copyright as to uploading pictures from pages from the government of Mexico. In specific I'm refering to the page: This page Thanks. Alixb 01:02, 20 July 2007 (UTC)

Also I did an article with the new infobox you suggested for Municipalites in Mexico, if you could check it out for me and tell me if you would change anything that would be great. Municipality of Apozol Alixb 01:12, 20 July 2007 (UTC)

I looked for a while and cound not find an answer on the Mexican government copyright question. You may want to ask at Wikipedia talk:Copyright FAQ.
I made a couple of minor tweaks to Municipality of Apozol's infobox. Remember, it is English wikipedia, so in my opinion, it would probably be best to use Municipal President instead of Presidente Municipal. Also I placed a {{nowrap}} around the founder's name to keep it from breaking. Other than those couple very minor things, I think it is a great start. —MJCdetroit 02:04, 20 July 2007 (UTC)

Infobox settlement for Ghost towns

Hi, MJCdetroit. We talked before about the infobox for settlements in BC. What are your thoughts on using it for ghost towns, with no population? Or is there something more appropriate.CindyBotalk 17:45, 18 July 2007 (UTC)

All the parameters except "official_name" are optional (including population). So yes, it would work for a ghost town. You should put Ghost town as the "settlement_type". —MJCdetroit 18:20, 18 July 2007 (UTC)
Here is an example that I did: Barkerville, British ColumbiaMJCdetroit 18:58, 18 July 2007 (UTC)
Thanks! And that infobox at Barkerville looks good.CindyBotalk 00:22, 19 July 2007 (UTC)

Ainsworth, British Columbia

I messed up on that Stats Can reference that said 1,525 people. That's for all of the Central Kootenays. Found another ref that says population 100 and added it. But I think that messed up the density calculations you did in the infobox? Sorry.CindyBotalk 05:51, 19 July 2007 (UTC)

I have nominated you for adminship

Please reply on my talk page, or if you want you may just accept the nomination and add it to the RFA page yourself. I don't know if you really want to be an administrator, but there's certainly no harm for you to have the tools. I would not be intimidated by the frequent controversy that surrounds RFA - your request should pass unanimously, or nearly so. I wish you good luck. Shalom Hello 21:02, 19 July 2007 (UTC)

I have notified the users that you requested me to notify about the coming RFA. I assume you know how to transclude the RFA where people can see it; you are free to do so at any time. Shalom Hello 02:55, 20 July 2007 (UTC)
Ah, so you're finally taking the plunge. Well, I won't be able to get to the co-nom statement until later, but I'll make sure to fill it out asap. Actually I went and did it now, good luck. Wizardman 03:00, 20 July 2007 (UTC)
I'd be happy to co-nom, but it seems kind of superfluous (unless you're looking to be the first admin with 100 co-noms as opposed to 100 support votes :) ). -- Rick Block (talk) 04:15, 20 July 2007 (UTC)
There have been four editors who have wanted to nominate me in the past and (for a lack of better words) I did not take them up on their offers. I was just trying to be fair and show some respect to them. However, somebody always has to be the first! Thanks RB, —MJCdetroit 12:47, 20 July 2007 (UTC)

Need your expert help!

Hello! I hope you are feeling great! Anyway, I would like to have your expert help with regards to a template. For further information, please view this page. I heard from your ongoing RfA that you are an expert in templates and I hope that you will be able to fix this minor problem, so as to achieve greater consistency. --Siva1979Talk to me 15:07, 22 July 2007 (UTC)

I certainly wouldn't use the term "expert". I've just figured things out through trial and error and knowing who the true experts are to ask when I was stuck. I'll give it a look. —MJCdetroit 16:49, 22 July 2007 (UTC)
Looks like Steve Block and Aftermidnight fixed it.  :) MJCdetroit 16:57, 22 July 2007 (UTC)

Template:Height

It was my intention to deprecate {{height}} from the beginning. What I did not realize, however, was that it was designed to convert both ways (i.e., meters to feet, as well as feet to meters). It is fairly simple to replace all existing occurences of {{height}} with {{ft to m}}, {{m to ft}}, and {{ft in to m}} ({{m to ft in}} still needs to be written), but my idea was that, in order to avoid this mundane work, it would be easier to re-write {{height}} so that it recognizes which parameters are being passed to it and calls an appropriate conversion template with those parameters. That is not a terribly complicated task, but, unfortunately, I am unable to take care of it being short on time. If someone wants to tackle that in my absence, it's fine; otherwise I'll do it when I am again available. Best,—Ëzhiki (Igels Hérissonovich Ïzhakoff-Amursky) • (yo?); 19:21, 24 July 2007 (UTC)

I have re-written {{height}} so it now relies on existing conversion templates. I did not implement any of the parameters except precision, but rather duplicated the defaults {{height}} was using before the upgrade (except automatic wikilinking of units, which I think is distracting in infoboxes where {{height}} is mostly used). Please let me know if you see any problems. Best,—Ëzhiki (Igels Hérissonovich Ïzhakoff-Amursky) • (yo?); 20:40, 2 August 2007 (UTC)

MOSNUM

Thanks for warning me! I've reverted it. I thought Crissov was a good fellow. Tony 05:40, 26 July 2007 (UTC)

Collapsible list

Someone should rewrite the template to use "collapsible" instead of "NavFrame". I tried but I didn't have sucess. I also asked to User:David Kernow if he can make the migration to "collapsible", but he didn't reply. — Guilherme (t/c) 18:47, 27 July 2007 (UTC)

Replied on your talk page. —MJCdetroit 19:51, 27 July 2007 (UTC)
Nice work :-) but It didn't works here... probably you may call support for someone. By the way, I think's better modify the "original" template instead of create another. — Guilherme (t/c) 19:49, 1 August 2007 (UTC)

Congratulations, you are now an administrator

I'm happy to inform you that, due to your successful request for adminship, you have now been promoted to an administrator. If you have any questions, feel free to ask me or stop by the administrators' noticeboard. Congrats! Andre (talk) 01:55, 28 July 2007 (UTC)

Congratulations! -- Rick Block (talk) 14:05, 28 July 2007 (UTC)
Just as Bartles and James used to say, "Thank you for your support" —MJCdetroit 17:28, 28 July 2007 (UTC)

Congrats on your well-deserved promotion!—Ëzhiki (Igels Hérissonovich Ïzhakoff-Amursky) • (yo?); 18:56, 28 July 2007 (UTC)

Cheers! --Fire Star 火星 19:44, 28 July 2007 (UTC)

I couldn't be any happier about the results. congratulation. youngamerican (wtf?) 17:41, 30 July 2007 (UTC)

Re: question

Congratulations for your appointment! From Wikipedia:NavFrame it appears that this feature only exists in collapsible tables:

Initially shown
Item 1
Item 2
Item 3


By the way, how about this, would it be over doing it?--Doron 21:14, 28 July 2007 (UTC)

Worldtraveller (the FAC nominator) is no longer around, so I wasn't sure which units to use first. Initially, I used feet, since it's the US, but then I switched back to metric, because it's a scientific article. Now you've switched back to feet. I reverted my last change to agree with yours, so hope they're all in the same place now. SandyGeorgia (Talk) 04:32, 29 July 2007 (UTC)

hmmm, I looked again, and you had only changed a few, so now they're not consistent. Let me know which way you want to go. Also, the image in References causes a chunk of white space before the refs on my browser. SandyGeorgia (Talk) 04:35, 29 July 2007 (UTC)
I did the swap because it IS a U.S. centric article. Whether it is or isn't a scientific article is debatable. I tried to be consistent throughout. I didn't think that I missed any, I'll take a second look. The image in the refs does place a white space just below it in my browser (FF for mac) too.  :) —MJCdetroit 13:00, 29 July 2007 (UTC)
OK, so we'll use imperial first; not sure anyone is watching that article, and it goes to the main page soon. Since there's no main editor, why don't we completely juggle the images to eliminate that space? Regards, SandyGeorgia (Talk) 13:04, 29 July 2007 (UTC)
I was about to but kept getting a database locked message. Then I had to leave. —MJCdetroit 16:17, 29 July 2007 (UTC)
I think I caught the last convert, but another set of eyes would be good. SandyGeorgia (Talk) 16:18, 29 July 2007 (UTC)
I'll look later. —MJCdetroit 16:22, 29 July 2007 (UTC)

Logo/Coat of amrs in Kingston upon Hull

Nice work in sorting the crest/logo section the Settlement infobox. --TFoxton 19:20, 30 July 2007 (UTC)

I tweaked the Manchester infobox as well. I think that York should be the next UK settlement to be switch to use Infobox Settlement—hint, hint. :) —MJCdetroit 19:24, 30 July 2007 (UTC)

You've got the flamethrower...

now head over to Cat:CSD and nail a db-bio. good for stress relief. :) youngamerican (wtf?) 19:29, 30 July 2007 (UTC)

Thanks for your comment!

Yup, was a lot of effort, but worth it in the end. Thanks for your valuable contributions, too. Tony 13:57, 31 July 2007 (UTC)

Infobox Edits

It is not wikipedia common practice to clutter infoxboxes for city articles with references to every single stat given. I'm following precedent. We don't have to give little reference links to things such as mayors and city managers. That's ridiculous. You go to any other major city page to see how things are done. This is not to mention things such as population data, area data, etc...are already cited within the article, itself. Citing these things in the infobox not only clutters them, it is inherently redundant and silly. --Criticalthinker 19:41, 31 July 2007 (UTC)

BUT, I could agree with making note of the footnotes if people just so have the need to do so, even though that is still redundant given that all of the infomation cited in the infobox is already cited in the articles. --Criticalthinker 19:52, 31 July 2007 (UTC)

(edit conflict)
We don't have to give references??? Then how do we know the information is verifiable? Especially for places that most people have never heard of like Berkley, Michigan or Bloomfield Hills, Michigan. How does a reader know the information is correct? In many cases for American cities the population data, area data, etc... only says according to the census of 2000 there were, but it doesn't actual give any type of verifiable source like the census fact finder website. Anyone can change the figures to suit their fancy and are the next readers to the article just supposed to assume that the values given are 100% factual? The infobox has specific fields for citing references so that it doesn't get too cluttered. Sometimes the figures in the infobox are the only figures given. Seems to me that if there is a reference available, it would be silly not to use it. —MJCdetroit 20:07, 31 July 2007 (UTC)